« previous next »
Pages: [1]   Go Down

Author Topic: Air filter  (Read 4846 times)

Adam Hicklin

  • Guest
Air filter
« on: March 15, 2016, 07:25:53 PM »
Attempting to change the air filter in the C-12. Removed the bottom cover and expected it to slide out. Nope.  I need to know if it just needs to be tugged on or is there some other thing to do to release it?

Thanks as always.
Logged

Keith Moffett Co-Admin

  • Administrator Group
  • *
  • Posts: 1145
  • Thanked: 322 times
  • Every day is a blessing!
Re: Air filter
« Reply #1 on: March 16, 2016, 01:19:28 AM »
Adam
Ours is similar and just friction fit.  The first time I changed it it was pretty dirty and hard to remove.  You might dry rag the inside of tbe canister and tube.
Logged
2007 Patriot Thunder
45' C-13
2006 Explorer Ltd.
DW is Carol
Safe travels and
May God bless!

Edward Buker

  • Guest
Re: Air filter
« Reply #2 on: March 16, 2016, 04:46:27 AM »
As Keith said just a friction fit but it is intended to not allow dirt in at the interfaces between the rubber and metal or plastic interfaces so it will take a good tug, maybe some rotation to get it to release.

Later Ed
Logged

Adam Hicklin

  • Guest
Re: Air filter
« Reply #3 on: March 16, 2016, 05:20:24 AM »
Thanks guys. That's what I thought but I'm never quite sure with this beast.  And mistakes tend to be expensive....I've come to realize. 
Logged

Keith Moffett Co-Admin

  • Administrator Group
  • *
  • Posts: 1145
  • Thanked: 322 times
  • Every day is a blessing!
Re: Air filter
« Reply #4 on: March 16, 2016, 11:39:17 AM »
Adam, it never hurts to ask first and go in with some forwarning.  Besides, I actualy knew the answer for once!
Logged
2007 Patriot Thunder
45' C-13
2006 Explorer Ltd.
DW is Carol
Safe travels and
May God bless!
Pages: [1]   Go Up
« previous next »