Back up camera replacement

[Adam Hicklin]

I need to replace my back up camera, and possibly the monitor.  My original camera has a BNC connector and also a red and black wire connector which I'm assuming is power.  All the modern cameras have a red and yellow RCA connector.  Is there no power?  Typically RCA is yellow for video, red and white for sound.  Any help and advice is appreciated.

[Steve Huber]

Adam,
If I remember correctly on my replacement, the yellow BNC is video and the red is power/gnd. Audio does not come from the camera. You'll need to get a BNC to Coax adapter for the new camera. Here's a post that may be helpful.
Steve
http://beaveramb.org/forum/index.php/topic,4047.msg32150.html#msg32150

[Adam Hicklin]

Thanks Steve. Yes,  I read that post and a couple others.  Assuming the red RCA connector is power, did you just cut it off and wire directly to the coach power supply?

[Steve Huber]

Adam,
If I remember correctly  I found an adapter at Radio Shack or Frys. Maybe Gerald remembers as he installed the same camera.
Steve

[John Bagwell]

Look at and call rvcam.com, they are very helpful and knowable of rv camera systems.  I changed mind out also.

[Gerald Farris]

Abam,
I purchased a BNC to coax adapter from Amazon for my rear view camera installation at the same time I ordered the camera.

Gerald