« previous next »
Pages: [1]   Go Down

Author Topic: Brake job  (Read 3034 times)

john brunson

  • Guest
Brake job
« on: October 29, 2017, 12:08:54 AM »
Guys,

The brake job is complete- new calipers, pads, rotors, seals, bearings, all hoses, and a fresh brake light switch.   Total shop bill ncluding parts was just over $2000.

Thanks for all the help running down parts... it took several weeks, but the bus stops awesome.

John
Logged

Mike Shumack

  • Guest
Re: Brake job
« Reply #1 on: October 29, 2017, 02:14:10 PM »
Is that cost for brakes on all axles?  Are these "Air brakes" or hydraulic?
Do you have Disc brakes on all axles (or Drum on rear)?
Logged

LaMonte Monnell

  • Guest
Re: Brake job
« Reply #2 on: October 29, 2017, 05:44:44 PM »
I just had my front brakes replaced on our 01 Contessa.

Rotors, pads, calipers, wheel hubs, brake fluid flush and replacement of fluid. Two new front tires also put on.

Brake lines were good. We haven't picked it up from the shop yet though.

Total bill was $2063. I bought the calipers, and pads myself.
Logged

john brunson

  • Guest
Re: Brake job
« Reply #3 on: November 29, 2017, 09:33:20 PM »
Bothl axles... remanufactured loaded calipers from Bepco.biz, rotors, seals, bearings form NAPA, DOT certified hoses from local fab shop, and new brake switch from NAPA.  8 hours labor~~ $640
Logged
Pages: [1]   Go Up
« previous next »