Retractable step problem

[Dale Walker]

Good morning Beaver lovers. My retractable steps quit working, so this morning I started investigating and found the bolt that holds the gear up, has a lever that attaches to the step. I have looked in my manual to ascertain what brand it is. Hopefully one of you fellows knows what brand was  used on the Beaver??

Thanks in advance!

Dale

[Steve Huber]

Dale,
Most were made by Lippert. This may be helpful. https://beaveramb.org/acadp_listings/entry-step-problems/
Steve

[Dale Walker]

Thanks, Steve. What I was/am looking for is a parts catalog for the unit. You link did alert me to another problem, a leaking purge pump and filter.

[Stan Simpson]

Lippert Components..online store..replacement parts. Mine were made by SCS Frigette, which was bought out by Lippert.

https://store.lci1.com/shop-by-department/steps/step-parts-accessories/motors-switches.html?p=2

They have a live chat available. Be careful, there are different numbers of teeth for the gear depending on the model you have. I have been through several trouble-shooting episodes with our steps. With one exception, when it was a corroded connection in the wheel well, it came down to the ground wire. I would start there first.

[Dale Walker]

Thank you Stan for the reply and the webpage. What I've been looking for is for a parts break down, further than the gear box and the motor. The motor is fine, I guess, what happened is the gear plate with the linkage to steps, broke the bolt it pivots on. If I were in MI. I could fix it pretty quick, but, you know how that works when you are in AZ. It looks like the only fix at this point is a new set of steps. That looks like the easiest way out at this point.

Dale

[Stan Simpson]

Thank you Stan for the reply and the webpage. What I've been looking for is for a parts break down, further than the gear box and the motor. The motor is fine, I guess, what happened is the gear plate with the linkage to steps, broke the bolt it pivots on. If I were in MI. I could fix it pretty quick, but, you know how that works when you are in AZ. It looks like the only fix at this point is a new set of steps. That looks like the easiest way out at this point.

Dale

Dale, I have the owners manual, with a parts and assembly breakdown. Its a PDF file, too large for here. I can send it via email if you'd like.

Stan

[Dale Walker]

I would appreciate that, Stan! I can replace the steps, but really hate to. The pivot bolt broke, kind of a shame to junk perfectly good steps because you can't buy that bolt? Or if you have a webpage, either one would be great!

Dale

[Stan Simpson]

Dale,
I sent it via email to the address on the BAC Directory. Let me know if you get it, please.
Stan

[Dale Walker]

I sent you a reply, Stan. If you didn't get it, I know you will see this, Thank you, very much. It is much appreciated! Dale