« previous next »
Pages: [1]   Go Down

Author Topic: Black Tank  (Read 2505 times)

Bobby Kirk

  • BAC Member
  • *
  • Posts: 135
  • Thanked: 14 times
Black Tank
« on: December 27, 2019, 05:29:46 PM »
Have a 06 Beaver Marquis with Aladdin system.. When I calibrate my tanks the black tank has the same RAW value for
full and empty (1023) have a new sensor installed and am getting crazy numbers. Any help appreciated .

Bobby Kirk
Logged
2006 Marquis

Jim Edwards

  • BAC Member
  • *
  • Posts: 199
  • Thanked: 64 times
Re: Black Tank
« Reply #1 on: December 28, 2019, 12:06:51 AM »
If you have the catcon sensors you may need to replace the "phone" connector on the end of the cable. I believe it is an rj45. 
Logged
Jim Edwards
2005 Monterey Laguna III, 40 ft Cat C9
2007 Country Coach Affinity 45 ft Cummins 600
15 Grand Cherokee

Bill Lampkin

  • BAC Member
  • *
  • Posts: 1234
  • Thanked: 360 times
Re: Black Tank
« Reply #2 on: December 28, 2019, 02:49:44 AM »
I think Aladdin uses all rj11 (4 pin) connectors, just like a regular telephone (remember those?) cord. An rj45 is used for ethernet, and is a 6 pin connector.
Logged
2005 Patriot Thunder Lexington, 3 slides
40' tag axle (short wheelbase)
525 hp C13

"Goin where the weather suits my clothes..."

Bobby Kirk

  • BAC Member
  • *
  • Posts: 135
  • Thanked: 14 times
Re: Black Tank
« Reply #3 on: December 28, 2019, 02:55:28 AM »
Thanks for the info will replace the end.  Thanks
Logged
2006 Marquis

Dennis Belfils

  • Guest
Re: Black Tank
« Reply #4 on: December 30, 2019, 09:29:11 AM »
We have the same problem, but with the Fresh tank. 1023 on both. Tried new phone line, but no change. Thinking it is the module, but not sure how to confirm.
Logged
Pages: [1]   Go Up
« previous next »