BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
Black Tank
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Black Tank (Read 2508 times)
Bobby Kirk
BAC Member
Posts: 135
Thanked: 14 times
Black Tank
«
on:
December 27, 2019, 05:29:46 PM »
Have a 06 Beaver Marquis with Aladdin system.. When I calibrate my tanks the black tank has the same RAW value for
full and empty (1023) have a new sensor installed and am getting crazy numbers. Any help appreciated .
Bobby Kirk
Logged
2006 Marquis
Jim Edwards
BAC Member
Posts: 199
Thanked: 64 times
Re: Black Tank
«
Reply #1 on:
December 28, 2019, 12:06:51 AM »
If you have the catcon sensors you may need to replace the "phone" connector on the end of the cable. I believe it is an rj45.
Logged
Jim Edwards
2005 Monterey Laguna III, 40 ft Cat C9
2007 Country Coach Affinity 45 ft Cummins 600
15 Grand Cherokee
Bill Lampkin
BAC Member
Posts: 1234
Thanked: 360 times
Re: Black Tank
«
Reply #2 on:
December 28, 2019, 02:49:44 AM »
I think Aladdin uses all rj11 (4 pin) connectors, just like a regular telephone (remember those?) cord. An rj45 is used for ethernet, and is a 6 pin connector.
Logged
2005 Patriot Thunder Lexington, 3 slides
40' tag axle (short wheelbase)
525 hp C13
"Goin where the weather suits my clothes..."
Bobby Kirk
BAC Member
Posts: 135
Thanked: 14 times
Re: Black Tank
«
Reply #3 on:
December 28, 2019, 02:55:28 AM »
Thanks for the info will replace the end. Thanks
Logged
2006 Marquis
Dennis Belfils
Guest
Re: Black Tank
«
Reply #4 on:
December 30, 2019, 09:29:11 AM »
We have the same problem, but with the Fresh tank. 1023 on both. Tried new phone line, but no change. Thinking it is the module, but not sure how to confirm.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
Black Tank