Ok, so I used to think I was pretty smart but over the last couple of days, not so much. I went through the fault code process and am confused with what I saw. So there was 4 flashes that I assumed were the initial system start. Then came 6 followed by 4 (64 right). Then 6 followed by 4 again (I checked 3 times to be sure). Then 7 followed by 5 (my fault code list stops at 74). Then finally there was 1 single flash then no more. I made a video of it but I think it's too large to post here if videos can be posted at all. So my confusion? Why two 64 codes and a mysterious 75 code. Am I reading the sequence wrong?
MJ