BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
Programming a Voyager AOM 7694
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Programming a Voyager AOM 7694 (Read 141 times)
Steve Huber Co-Admin
Administrator Group
Posts: 3538
Thanked: 2719 times
Programming a Voyager AOM 7694
«
on:
June 28, 2024, 01:13:35 AM »
The Voyager video monitor in our 07 Contessa has worked flawlessly for years. After having in the shop for an engine check I noticed that the rear camera does not select when reverse is selected on the tranny panel. The rear camera works and can be selected manually (Channel 1)with no problem. For some reason shifting to reverse selects Channel4m which has no camera connected. Turn signal cameras work fine.
I've got the manual but it's no help. Does anyone know how to change the reverse selection camera?
Thx, Steve
Logged
Steve
Coachless
2015- 6/24 07 Contessa Bayshore C9, 400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp
Scott Shearer
BAC Member
Posts: 157
Thanked: 64 times
Re: Programming a Voyager AOM 7694
«
Reply #1 on:
June 28, 2024, 06:35:29 PM »
Steve,
You may have already seen these, but here are a couple Google search phases that might be of interest.
“Voyager AOM 7694 troubleshooting”
“Replaced a Voyager display and Aladdin does not
Work”
-Scott
Logged
Scott & Susie Shearer
2006 Patriot Thunder
Lexington IV 40'
Cat C13
2015 JKU Hard Rock
Steve Huber Co-Admin
Administrator Group
Posts: 3538
Thanked: 2719 times
Re: Programming a Voyager AOM 7694
«
Reply #2 on:
June 28, 2024, 11:14:10 PM »
Thx Scott, but no joy...
Steve
Logged
Steve
Coachless
2015- 6/24 07 Contessa Bayshore C9, 400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
Programming a Voyager AOM 7694