Author Topic: Silverleaf and auto genstart question  (Read 2902 times)

Marty and Suzie Schenck

  • Guest
Silverleaf and auto genstart question
« on: March 06, 2014, 02:49:01 AM »
2002 Patriot Thunder. Does anyone know where the Silverleaf auto genstart wire harness connects at the generator? My Silverleaf can shut down the gen but will not start it anymore. The diagnosis at the silverleaf reads: fault  genset comm failure. I have found the Silverleaf Total Power Controller and the Generator Interface Board and checked connections there but I need to know where the interface connects to the gen wire harness to check those connections. Thanks Marty

Gerald Farris

  • Guest
Re: Silverleaf and auto genstart question
« Reply #1 on: March 06, 2014, 01:53:29 PM »
Marty,
The best source for information and trouble shooting help on the Silverleaf system in your coach is to call Silverleaf. Martin Perlot the founder and owner of Silverleaf Electronics, was very involved with the installation of his systems in Beaver coaches because his father, Mat owned Beaver at the time your coach was built.

Gerald    

Marty and Suzie Schenck

  • Guest
Re: Silverleaf and auto genstart question
« Reply #2 on: March 07, 2014, 12:16:57 AM »
Thank you Gerald