« previous next »
Pages: [1]   Go Down

Author Topic: Lost 12v power too ignition  (Read 1832 times)

Joe Westbrook

  • Guest
Lost 12v power too ignition
« on: November 06, 2017, 06:04:12 PM »
Replacing slide & leveling jack motor , while working I had motor running in and out and lost 12v power ,can not find out what happen!  No power too ignition too start engine. Would like any help I can get !  Also need wiring for pump . Thanks JOE 2001 Marquis
Logged

Joel Ashley

  • BAC Member
  • *
  • Posts: 2362
  • Thanked: 808 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Re: Lost 12v power too ignition
« Reply #1 on: November 06, 2017, 07:43:04 PM »
First thoughts go to the solenoid on the bottom center of the back wall in your electric bay.  Check that both large posts get voltage when the ignition is in the ON position.

Joel
« Last Edit: November 07, 2017, 08:19:48 AM by Joel Ashley »
Logged
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Gerald Farris

  • Guest
Re: Lost 12v power too ignition
« Reply #2 on: November 07, 2017, 03:51:51 AM »
Joe,
It sounds like the high amperage chassis battery fuse failed. It should be located on the panel above your batteries.

Gerald
Logged
Pages: [1]   Go Up
« previous next »